Sau asa:
Well, I figured it out for my phone at least.
I’ll post what I did, maybe it works for you guys.
Mac OSX Leopard here. iTunes 7.7 of course.
As I said, I upgraded, retarded Bootneuter hanged up, turned off the phone, “bricked”.
Errors all together: All the fuc**** 16xx errors.
First thing I did was DFU, recovery etc 1 zillion times, different USB ports etc. Nothing works. A road that did not work at all, so I gave up.
First I downgraded as I stated in my previous post with this guide:
http://sleepers.net/news/guides/20-to-114-downgrade/
I found iTunes 7.5 with some easy googling.
After downgrading to 1.1.4, I activated with iLiberty+ (not unlock). Installed Bootneuter from installer. Reflashed bootloader to 3.9. No FB, no neuter, no unlock, everything off so it could be close to being virginized. Then I ran kiPhone with iErase just to be sure that the baseband was virgin (probably doesn’t matter, but I did it anyway).
Took a DFU restore to 1.1.4 again so the baseband could be reflashed and be in an working state again.
So, now I decided to try the damn 2.0 upgrade again. I removed everything in the device support folder (check the devteam blog if you don’t know what I’m talking about). Upgraded to iTunes 7.7 through Software Update. Back on clean sheets I hope.
So, from here, I was still on 1.1.4 (kinda virgin, no bootneutered phone etc.). iTunes 7.7. Phone still connected without the SIM-card and turned on.
1) Closed iTuneshelper and iTunes.
2) Started Pwnagetool _1.1_. Pwned the phone.
3) Then I opened Pwnagetool 2.0, made a new firmware, opened up iTunes again.
4) Had the power-off button in until I got slide to power off. Then I “slided to power off”.
5) Phone turned off normally. Took the USB-cable out of the iPhone. Had the home button pressed in, then I put the USB-cable in again.
6) Phone automatically started in regular recovery mode (not DFU). If it doesn’t, try turning it on, and slide to power off again, and change USB port.
7) iTunes finds phone, recovery mode whine. Restored with the 2.0 PwnageTool 2.0 firmware.
8) Finally it restores. And after that, finally the fucking bootneuter works, but let it do it’s magic for 3-5 minutes.
There you go!
The post is kinda messy, but I’ll try to improve it. Hope this helps out for you guys. Worked for me And I was in the same situation as you guys are. Good Luck!