Cum imi dau seama daca ipodul meu classic de 160 gb cumparat acu 4 zile din Las Vegas este ultimul model ?

Cred ca tre` sa verifici ce firmware ai pe el.
Sau ultimul model are anumite functii ce nu le au modelele mai vechi. (cauta pe net cu ce e mai diferit iPodul mai vechi decat cel nou)
Verifica daca ai acele functii.

factura,garantie,serial.

iPod classic 160GB (Late 2009)
IMEI: Serial number: 8K93######  Check another serial number
Coverage: Limited Warranty More information

Late 2009 - deci e ultimu’ răcnet (până apare altul mai nou).

Daca nu era cumparat din Las Vegas nu putea sa fie ultimul model. Noroc de tine. :D

Sp4n4C nu am inteles ce vroiai sa zici.

Mai am o mica intrebare legata de garantie.
Garantia este valabila in Romania? Am bonu fiscal cu data cumpararii de acolo.

Adresez și eu o întrebare aici, fiindcă e oarecum înrudită cu subiectul de bază: mă bate gândul să cumpăr un iPod Nano 3rd Gen (cel mic și pătrat, anterior ăstora mari și cu aspect chinezesc ), dar nu știu cum se poate verifica cât de vechi este, adică mă refer la baterie (există vreo comandă/combinație gen Ctrl+Alt+Del prin care să văd câte ore a fost “forjat”)? Mulțumesc.

de pe net:

Diagnostic Mode

You access the diagnostic mode by first resetting the iPod. When you see the Apple logo, press and hold Previous and the Select button until you see a reversed Apple logo. Let go and you’ll see the following entries.

5 In 1   Performs a series of tests including checking the backlight, memory, and USB ports.
RESET   resets the iPod. This is one way to exit the Diagnostic screen.
KEY   you press the keys, it tells you if they work.
CHGRCUR   I’m guessing on this one. Seems to allow you to turn on and off charging methods.
REMOTE   Allows you to test the buttons on the remote control.
HP STAT   Indicates if something is plugged into the headphone jack and the state of the hold switch.
SLEEP   Puts the iPod to sleep.
BATT A2D   Checks the iPod’s power supply and (maybe?) indicates the amount of charge in the battery.
A2D STAT   Battery and power supply related.
FIREWIRE   Checks FireWire chip.
HARD R/W   Read and write hard drive test. Reads HDD pass if all goes well.
SMRT DAT   Another hard drive test. Reads RETRACTS 4 REALLOCS 0 PENDING 0.
SMRT SCAN   Appears to be akin to a regular iPod’s Disk Scan test. This takes several minutes so don’t perform this test unless the iPod is plugged into a power source.
DRV TEMP   Displays drive temperature.
DISKMODE   Throws the iPod into Disk Mode.
WHEEL   Run your thumb around the wheel and watch the values change.
CONTRAST   Runs contrast test. My Diagnostic screen was really light. Running this test made it much darker and more legible. Proceed through the screens by pressing the Play button.
AUDIO   Displays audio gain. Can move up as high as 127 by pressing Forward button. Default is 120.
STATUS   tells you what’s plugged into your iPod—whether it’s being charged via FireWire and has something plugged into the headphone port, for example.
IRAM3   unknown
CLEAR BLKS   unknown
ALLSDRAM   unknown
HDD DROP   unknown
To move from test to test, use the Previous and Forward buttons. To initiate a test, press the Select button. To exit tests when they’re completed, press the Play button.

Stie cineva cum pot inregistra sunet pe ipod ?

Pai nu se poate face de la Voice Memos? Detalii aici.

ideea este de unde cumpar microfonu ala.

de la apple store
sau intrebi la reseleri

Daca nu gresesc, cred ca poti sa folosesti casti de iPhone care au microfon pe fir. Daca e asa, cel mai repede le gasesti la un Orange Store.